Hot Rod and Custom Air Conditioning

Phone 0419 514 327

This month's HOT special - Save 10% off condensors!   View Details

Compresors

All New - Not Rebuilt!
The Best Quality Compressors
Sanden USA’s quality management system is ISO/TS 16949:2002 certified
All compressors available with V-Belt or Serpentine pulley.
We recommend compressor safety Switches


Sanden SD 508 Compressor
This compressor is recommended for all Vintage Air systems. It pumps 8.4 cubic inches per revolution with a
maximum 6000 sustained RPM range. Available in standard finish or polished. Fits all Vintage Air brackets
Sanden SD 508 Compressor 134a
04808-VUA Double V groove pulley-standard finish
04808-VUQ Double V groove pulley-polished finish
04808-VMA 7- Groove serpentine pulley-standard finish
04808-VMQ 7- Groove serpentine pulley-polished finish
046700-KUR 8- Groove serpentine 7 Cylinder 9.5 c.i.
04808-SWA Single wide groove pulley-standard finish (3/4” Belt)
04808-SWQ Single wide groove pulley-polished finish (3/4” Belt)

Sanden SD 7 (model 7176) Front Runner Compressor
This compact but high performance compressor is an integral part of our award winning Front Runner TM Accessory Drive system. Use only with our pulleys engineered specifically for this compressor.
Sanden SD 7 Compressor 134a
04670-MTA 6-Groove serpentine pulley - standard finish
04670-MTQ 6-Groove serpentine pulley - polished finish
046702 V-Belt pulley - standard finish
046703 V-Belt pulley - polished finish

Sanden Direct GM Replacement Compressor
Bolts into accessory drive mounts on most GM engines from 1996 to 2000. Chevy and GMC 4.3 six and 5.0, 5.7 V-8’s. Also Cadillac Escalade 5.7 and Olds Bravada 4.3
Sanden Direct Replacement GM Compressor 134a
046440-MTR 6- Groove serpentine pulley - standard finish
046441-MTQ 6- Groove serpentine pulley - polished finish

Sanden Rear Exit Compressor
Excellent solution to low hood clearance issues. SD 508 Compressor with rear exit #8 and #10 male 0-ring fittings. Compatible with standard female o-ring fittings
Sanden SD 508 Compressor 134a
047000-SUR Double V groove pulley rear exit with #8 & #10 Fittings - standard finish
047001-SUQ Double V groove pulley rear exit with #8 & #10 Fittings - polished finish
047002-MUR 7- Groove serpentine pulley rear exit with #8 & #10 Fittings - standard finish
047003-MUQ 7- Groove serpentine pulley rear exit with #8 & #10 Fittings - polished finish
Refrigerant line o- ring adapters for SD 7 compressors
045008-VUR #8 O-ring adapter
045010-VUR #10 O-ring adapter
045010-VUR #8 O-ring for adapter
045010-VUR #10 O-ring for adapter
184136 Polished 12 point 8mm-1.25 bolt (no washer required)

Machined Aluminum Covers
Provides smooth detailed look and keeps
clutch assembly clean and dirt free.

04400-VUQ Aluminum V-belt clutch cover,
machined - V groove and Multi-groove 508
04401-VUQ Aluminum V-belt clutch cover,
polished - V groove and Multi-groove 508
04408-MCP Polished Front Runner
compressor clutch cover
04407-MCA Brushed Front Runner
compressor clutch cover

We can also also supply and install all your radiator, electric cooling fan and shroud needs.

Supply
We offer a wide range of components and kits.

Installation
We can install all the systems and components that we sell.